Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
17
Fig. 2-1Battery Installation and Replacement Steps
3
Battery status check
S3302 series spectrum analyzer is provided with one battery, of which the standby time is 2.5h under full-capacity
conditions.
The user can view the battery status in the following methods:
Observe the battery icon on the system status bar to roughly know the battery capacity. If only 15% exists
in the battery icon, replace or charge the battery promptly.
Take out the battery and press the button on the white point at the tail end of the battery. Then the
indicator above the button will be ON, showing the current residual capacity. If only one indicator is ON,
the battery should be charged promptly.
4
Battery charging
The power indicator is located in the yellow power ON key.
