Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
144
5
Measurement menu
Display
Fig.
Table
Measure
Max Hold
Off
On
Unit
Channel Freq
Power Display
Real Time
Maximum
Colors
Unit
Pair
Icon direction
Vertical
Parallel
· [Display Graph Table]:
Press [Measure]→[Display Graph Table]
and select the graph/table mode, as shown in Fig. 8-7 and 8-8.
· [Max Hold Off On]:
Press [Measure]→ [Max Hold Off On] to
enable or disable the maximum holding function.
· [Channel Units Ch Freq]:
Press [Measure]→[Channel Units Ch
Freq] and set the channel or frequency display mode.
· [Power Display Curr Max]:
Press [Measure]→[Power Disp
lay
Curr Max] and set the current or maximum display mode. The
maximum power cannot be set until the maximum holding function
is enabled.
· [Color Code Single Dual]:
Press [Measure]→[Color Code Single
Dual], and set the single or dual display mode.
· [Orientation Vert Hori]:
Press [Measure]→[Orientation Vert
Hori] and set the vertical or horizontal display mode.
6
File menu
Refer to the description of the file menu in the spectrum analyzer mode
