Saluki Technology MSO1000, User Manual

Page: 7 / 76

Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
7
General Safety Summary
Read the following safety precautions to avoid injury and prevent damage to this product or any products connected
to it. To evade potential hazards, use this product only as specified.

Only qualified personnel should perform maintenance.

Avoid fire or personal injury.

Use suitable power cord.
Use only the power cord specified for this product and certified for the country of use.

Connect and disconnect properly.
Connect a probe with the oscilloscope before it is connected to measured circuits; disconnect the probe from the
oscilloscope after it is disconnected from measured circuits.

Ground the product.
This product is grounded through the grounding conductor of the power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground. Before making connections to the input or output terminals of the
product, ensure that the product is properly grounded.

Connect the probe in a right way.
The probe ground lead is at ground potential. Do not connect the ground lead to an elevated
voltage.

Check all terminal ratings.
To avoid fire or shock hazard, check all ratings and markings on the product. Refer to the product manual for detailed
information about ratings before making connections to the product.

Do not operate without covers.
Do not operate this product with covers or panels removed.

Avoid exposed circuitry.
Do not touch exposed connections and components when power is present.

Do not operate with suspected failures.
If you suspect there is damage to this product, have it inspected by qualified service personnel.

Assure good ventilation.

Do not operate in wet/damp environments.

Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry.