Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
72
3.
Push F2 button to select the trigger source channel(D0~D15).
4.
Push F3 button to select the “Pattern” option ( H, L or X).
5.
Push F4 button to select the trigger mode as Auto or Normal.
6.
Push F5 button to select the duration time, and turn VO knob to adjust the time of duration.
7.
Turn the timebase knob “SEC/DIV“ and adjust the time until you get a stable display of waveforms. See the
picture below.
Queue Trigger
To observe digital signal by using the queue trigger, please follow the step as below:
1.
Push the TRIG MENU button to see the trigger menu.
2.
Push F1 button to select “Queue” for the trigger type.
3.
Push F2 button to select the specific queue index (0-3).
4.
Push F3 button to select the trigger source channel (D0~D15).
5.
Push F4 button to select the pattern ( H, L or X).
6.
Turn the timebase knob “SEC/DIV” and adjust the time until you get a stable display of waveforms. See the
picture below.
