5
•
Ensure that the electrical parts of the urn are completely dry before
plugging into an electrical outlet.
NEVER IMMERSE ANY PART OF THE URN IN WATER.
DESCALING
•
Excessive lime-scale build-up can cause the element to overheat and
can even cause the tap to malfunction! Make regular checks of the
inside of the urn for signs of lime-scale.
•
It is essential that lime-scale deposits be cleaned using proprietary de-
scaling tablets, powders or liquids (available from most
supermarkets). Those in hard water areas may need to de-scale the urn
every week. Those in soft water areas won’t need to de-scale the urn
quite as often.
Important:
For a heavily scaled urn use approximately FOUR TIMES the
amount of de-scaling product required for a kettle. Repeat if necessary.
YOUR WARRANTY DOES NOT COVER MALFUNCTIONS CAUSED
BY EXCESSIVE LIMESCALE BUILD UP
.
WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the following
code:
BLUE
NEUTRAL
BROWN
LIVE
GREEN/YELLOW
EARTH
As the colours of the wire in the mains lead of this appliance may not
correspond with the colour markings identifying the terminals on your plug,
proceed as follows:
•
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured black.
•
The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L or coloured red.
•
The wire which is coloured GREEN/YELLOW must be connected to
the terminal which is marked with the letter E or (earth symbol) and is
coloured GREEN or GREEN/YELLOW
