2
Thank you for purchasing a SALTON Stainless Steel Urn. Each unit has been
manufactured to ensure reliability and safety. Please ensure that you read the
instructions carefully and keep the manual safe for future reference.
IMPORTANT SAFETY INFORMATION
It is essential that you read this section first in order to operate the urn
safely:
•
The hot water urns are constructed almost entirely of hygienic
stainless steel and should give many years of trouble-free service as
long as they are used in accordance with these instructions
.
•
Ensure that the voltage used corresponds to the voltage indicated on
the rating label on the underside of the unit.
•
Avoid touching the metal parts of the urn as they become hot during
use
•
Be mindful of hot steam coming from the lid vents
•
Always position the urn on a clean, level, heat-resistant surface that
can withstand the weight of the urn - both empty and once it is filled
with water.
•
Close supervision is necessary when using this appliance is used by or
in the vicinity of children.
•
Always switch off and disconnect the urn from the mains supply
before cleaning or when not in use.
•
NEVER attempt to move the urn when it is full of water, either hot or
cold.
•
Do not allow the urn to be immersed in liquid for cleaning purposes.
•
Do not attempt to disassemble the urn – there are no user serviceable
parts inside.
•
ALWAYS disconnect from the mains supply and allow the water to
COOL COMPLETELY before attempting to clean or de-scale the urn.
•
NEVER OVERFILL THE URN – only fill the urn up to the MAX line
•
Do not allow cold water to sit in the urn for more than 2 days as it
could stagnate, which is very unhygienic. Empty the water out
completely and refill if the urn has been standing idle over the
weekend or for a period of time.
•
This appliance is intended for household use only.
•
If the urn fails to operate; ensure that there is sufficient water in the
urn and that the manual reset cut-out has been reset if necessary. If the
problem persists, seek advice from your nearest authorised service
centre.
•
To protect against fire, electric shock and personal injury, do not
immerse the cord or plug in water or any other liquid.
•
If the supply cord is damaged, it must be replaced by the
manufacturer, an approved service agent or similarly qualified person
to avoid a hazard.
