water left inside before attaching to the Motor Body.
2. Place food to be processed in the Measuring Cup or a deep bowl.
3. Plug the unit into the wall outlet and choose the desired Speed.
NOTE: Speed 1, 2 or Turbo must be kept depressed for the duration
of use.
4. Move the hand blender gently in an up and down motion, until the
mixture is at the desired texture.
5. Once ingredients have reached the desired consistency, release the
Speed or Turbo Buttons.
6. Wait until the motor has completely stopped before lifting the Whisk
out of the Measuring Cup or bowl.
7. Unplug from the wall outlet.
8. To detach the Whisk Attachment, hold the Motor Body with one hand
and turn the Whisk Attachment counterclockwise to separate the 2
pieces.
IMPORTANT:
• NEVER immerse the hand blender past the stainless portion of the
Whisk Attachment.
• NEVER immerse the Motor Body into any liquid or mixture.
Helpful Hints
• The stainless steel Whisk may scratch non-stick coatings, avoid using
the Whisk in non-stick cookware.
• Do not allow the Whisk to hit the sides or bottom of the bowl or
container while in use to avoid damage to the Whisk.
• To prevent splattering, use deep, bowls or containers.
• When whipping egg whites and creams, use maximum speed for best
results.
• For easy cleanup, rinse Whisk Attachment immediately after use.
How to Use the Smoothie Blender Attachment
1. Fill the ToGo Bottle with smoothie/milkshake ingredients with the
harder ingredients on the bottom and the softer ingredients on the top.
Add a small amount of ice, if desired.
2. Place the Smoothie Blender Attachment on the ToGo Bottle by turning
clockwise until it locks into position.
3. Place the Motor Body on the Smoothie Blender Attachment by turning
the Motor Body clockwise.
4. Plug into the wall outlet.
5. Turn the assembly so that the Motor Body is on the bottom and the
smoothie ingredients fall towards the blade.
6. Choose the desired speed - see the Speed Setting section. Process
until you reach the desired consistency.
7. When complete turn the assembly so that the Motor Body is on
7