1. Place the Chopper Blade onto the metal pin in the center base of the
Chopper Bowl.
2. Prepare food to be processed in the Chopper Bowl by cutting into
uniform size pieces.
IMPORTANT: Do not fill above the (MAX) marking.
3. Line up the slots on the Chopper Bowl with the guide dots on the Lid
and turn until it locks into place.
4. Align the Motor Body with the Center Hub in the Chopper Lid. Turn
the Motor Body clockwise until it locks into place.
NOTE: Make sure the Chopper Lid is thoroughly dry and there is no
water left inside before attaching the Motor Body.
5. Plug the unit into the wall outlet.
6. Turn the Variable Speed Dial at the top of the Motor Body to the
desired speed between MIN and MAX then press the Speed II Button.
NOTE: Speed II must be depressed for the duration of use.
7. Although the Chopper has rubberized feet on the bottom of the
Chopper Bowl, keep one hand on the Motor Body and the other hand
on the Chopper Bowl to stabilize the unit while in use.
8. Once ingredients have reached the desired consistency or texture,
release the Speed II Button.
9. Wait until the motor has completely stopped then unplug from the wall
outlet. Detach the Motor Body from the Chopper by turning the Motor
Body counterclockwise. Lift the Motor Body away from the Chopper
Lid.
10.Remove the Chopper Blade and use a spatula to remove any food
stuck to the Chopper Blade and around the walls of the Chopper
Bowl.
NOTE: The Chopper Blade is very sharp. DO NOT use your fingers to
remove food that is stuck to the Chopper Blade.
HELPFUL HINTS
• When chopping, cut food into uniform sizes for best results.
• Do not process hard foods such as coffee, nutmeg, ice cubes or
chocolate. This may damage the Chopper Blade.
• Never process hot or boiling foods in the Chopper Bowl.
How to Use the Whisk Attachment
The Stainless Steel Whisk Attachment is designed for instant puddings,
ready-mix deserts, pancake mix, gravy and sauces, salad dressings,
scrambled eggs, whipping creams and egg whites.
1. Gently push the Whisk Attachment onto the Motor Body and turn
clockwise until it locks into position.
NOTE: Ensure the Whisk Attachment is thoroughly dry and there is no
6