3. To choose the 24 hour clock press the HOUR and MIN. pads simultaneously
until AM or PM does not show in the LCD Display Window.
Press the HOUR or MIN. Pads to change the time.
4. Press the PROGRAM pad twice to show the set time.
MAKING FILTER COFFEE
Plug into a 120 Volt AC outlet. Make sure the “Coffee” light is off.
1. Lift the Top Cover and pour in the water from the Carafe to the desired
amount indicated on the Water Level Indicator on the left side of the machine.
2. Swing out the Filter Holder. Place a coffee filter (#4 cone-shaped paper
or permanent filter) into the Filter Holder and add the desired amount
of ground coffee. Swing the Filter Holder back into the closed position.
3. Place the Coffee Carafe on the Keep Warm Plate. Make sure that
it is securely in position.
4. Turn the machine on by pressing on the Coffee On/Off Button. The light
will go on and the brewing cycle will begin.
5. The Keep Warm Plate will keep the coffee hot until the Coffee On/Off Switch is
turned off. The machine will automatically switch over to “Keep Warm’’ mode
for the next two hours. The “Keep Warm Cycle“ will shut off automatically and
the “On“ indicator light will go out at the end of the two hours.
PAUSE & SERVE FEATURE
The Pause & Serve feature allows you to pour a cup of coffee before the brew
cycle has finished. Remove the Carafe slowly to temporarily stop the flow
of coffee. Quickly pour a cup of coffee and reposition the Carafe securely on
the Keep Warm Plate.
NOTE:
Do not remove the Carafe for more than 30 seconds.
DELAYED BREW CYCLE
1. Make sure that the time is correctly set on the Clock (See instructions
in the “How to Set the Clock” section).
2. Prepare the ground coffee and water (See “Making Filter Coffee” section).
3. Press the PROGRAM pad until “TIMER” appears on the LCD Display Window.
5
SAL6-479 BookletSalton_VF_EN 5/26/06 1:48 PM Page 5
