4. Select the desired time by pressing the HOUR and MIN. pads until
you reach the desired program time.
5. Press the PROGRAM and COFFEE buttons together to activate the program.
6. This feature is activated when the AUTO indicator light is on.
7. To change the programmed time, press the PROGRAM button and repeat
steps 1 to 5 above.
MAKING ESPRESSO COFFEE
1. Plug into a 120 volt AC outlet. Make sure the Espresso/Cappuccino Light
is Off and the Steam Control Knob is turned clockwise to the closed position (-).
2. Lift the Top Cover.
3. Unscrew the Boiler Cap by turning it counterclockwise.
4. Fill the Espresso Carafe with 2 to 4 cups of cold water using the carafe
markings for reference.
5. Screw the Boiler Cap securely in place by turning clockwise.
6. Place the Metal Filter into the Filter Holder and fill to the desired level
with Espresso coffee.
NOTE:
Markings inside the Filter indicate coffee level
for 2 to 4 cups. Use a fine drip grind coffee.
NOTE:
If the coffee is too fine
the flow of water through the Filter will be impeded.
NOTE:
Never press
down on the coffee. Never fill the Filter above the 4 cup marking.
7. Brush away excess coffee from the edge of the Filter.
8. To insert the Metal Filter/Filter Holder, push upward into the machine
with the handle of the Filter Holder pointing to the left (Unlock position).
Then turn the handle to the right (Lock position) until locked securely.
9. Place the Lid on the Carafe and position under the Filter Holder.
NOTE:
To make espresso coffee directly into cups, clip the 2 Cup Adapter onto
the Filter Holder. Place cups directly under the two spouts.
10. Regulate the strength of the Espresso by turning the Espresso Strength
Control to any position between LIGHT and STRONG.
6
SAL6-479 BookletSalton_VF_EN 5/26/06 1:48 PM Page 6
