TROUBLESHOOTING
PROBLEM
SOLUTION
1.
Coffee does not flow.
• Remember to fill Reservoir or Boiler with
water before machine is switched On.
• Check if Switch is On.
• Use a coarser grind of coffee.
• Reduce the amount of coffee in the
Espresso Filter. Do not compact coffee
in the Filter.
2.
Coffee is too weak or flows
• Use a finer grind of coffee.
too quickly.
• Increase the amount of coffee in the Filter
• Adjust the Espresso Strength Control Dial
to 'STRONG' setting.
3.
Coffee flows too slowly
• Use coarser grind.
or is too strong.
• Reduce the amount of coffee in the Filter.
• Follow the Descaling instructions
in this booklet.
• Adjust the Espresso Strength Control Dial
to 'LIGHT' setting.
4.
Coffee flows from the edge
•
NOTE:
Allow machine to cool completely.
of the Filter Holder.
• Wipe excess grinds from the Filter Holder.
• Make sure the Filter Holder is installed
securely in the 'Lock' position.
5.
No steam from the Steam
•
NOTE:
Allow machine to cool completely.
Tube or steam stops before
• Remember to fill the Boiler.
frothing is complete.
• Check if the switch is On.
• Open the Steam Control Knob.
• Close the Steam Control Knob, remove
and wash the plastic Steam Nozzle.
Unblock the Steam Tube and using a
straight pin. Then try again.
6.
Steam escapes from
• This is the normal functioning of the
the Boiler Cap area.
pressure regulating device.
11
SAL6-479 BookletSalton_VF_EN 5/26/06 1:48 PM Page 11
