7
GENERAL FUNCTIONS
Switching the device on and off
1. Press the
On/Off button
to switch on the device from standby mode. The last function used is
automatically selected.
2. Switch the device to standby by pressing the
On/Off button
. The display shows ”GOOD BYE”
Adjusting the brightness of the display
1. Press the
Dimmer button
to adjust the brightness of display backlight in four levels (bright,
medium, low or off).
Notes:
Minimum power consumption in standby mode is only achieved if the display backlight is switched off.
Selecting the function mode
1. Repeatedly press the
Function button
to select the function between FM Tuner, MW Tuner, CD,
SD, USB and Auxiliary input modes.
Adjusting the volume
1. Adjusts the volume by pressing the
Volume Down
or
Volume Up button
.
Muting
1. Pressing the
Mute button
to switch the sound on and off. The display shows “Mute”.
Selecting the sound effects
You can select the sound settings USER, CLASSIC, POP, JAZZ and ROCK. The default setting is USER.
1. Repeatedly press the
DSC/UBS button
to select the desired sound setting.
Setting the equaliser and the Ultra Bass System (for USER sound setting)
The USER sound setting allows you to make your own personal equaliser settings.
1. Repeatedly press the
DSC/UBS button
to select the USER sound setting.
2. Press and hold the
DSC/UBS button
until “BASS 0” is shown on the display.
3. Set the value by using the
Volume Down
or
Volume Up button
.
4. Briefly press the
DSC/UBS button
to switch to treble setting. “TRE 0” is shown on the display.
5. Set the value by using the
Volume Down
or
Volume Up button
.
6. Briefly press the
DSC/UBS button
to switch to UBS setting. “UBS OFF” is shown on the display.
(The default is OFF.)
7. Switch the UBS on and off by using the
Volume Down
or
Volume Up button
.
Notes:
If you do not press any button within 5 seconds, the device will quit the setting.
Listening with UBS at high volume may have distortion. Recommend to use at low volume.
elite2_ib.indd 8
1/3/2011 17:48:06
