18
ALARM FUNCTION
Activating and deactivating the alarm
1. To deactivate the alarm, briefly press the
Alarm button
in standby mode. The alarm symbol
disappears on the display.
The alarm setting is saved.
2. To activate the alarm, briefly press the
Alarm button
again in standby mode. The display shows the
alarm symbol.
SLEEP FUNCTION
The device can be set to turn off after a preset time has elapsed. The sleep setting can be adjusted
between 10 and 90 minutes in 10-minute intervals.
Setting the sleep timer
1. Switch on the device, and select the listening source you desired.
2. Press the
Sleep button
to call up the function.
–The word “
90 MIN
” and the symbol >
< is shown on the display.
3. Repeatedly press the
Sleep button
to select the sleep time in 10-minute intervals.
The device will switch off after the preset sleep time has elapsed.
Cancelling the sleep timer
1. To cancel the sleep timer before the chosen sleep time has elapsed; press the
Sleep button
until
the word “00 MIN” shown on the display.
–The device remains switches on, and the symbol >
< disappears.
2. If you switch on the device and switch off the device before the sleep time has elapsed, press the
On/Off button
.
–The symbol >
< disappears, and the device is switched off.
REMINDER FUNCTION
The device can be set to remind you by sounding the signal tone at a preset time. The reminder time
setting can be adjusted from 10 to 120 minutes in 10-minute intervals.
1. Switch the device to standby mode, press the
NAP button
on the remote control.
The display shows ”NAP 10” and the symbol “
NAP
” flashes.
2. Repeatedly press the
NAP button
to select the reminder time in 10-minute intervals.
After the time has expired, a signal tone sounds.
3. Switch off the signal tone by pressing the
On/Off button
.
or
Interrupt the function early by setting the reminder time to “NAP 00” using the
NAP button
.
elite2_ib.indd 19
1/3/2011 17:48:06
