Salda AMBERAIR, Installation, Operation And Maintenance Manual

Page: 2 / 40

2 | EN EIOM v2018.04
1. CONTENTS
2. SAFETY PRECAUTIONS 4
3. FANS 5
3.1 FANS WITH AC MOTORS (1 SPEED) 5
3.2 FANS WITH AC MOTORS (2 SPEED) 6
3.3 FANS WITH EC MOTORS 6
3.4 FANS WITH PM MOTORS 11
3.4.1 VSD INTEGRATED ON MOTOR 11
3.4.2 VSD DELIVERED LOOSE (FC101 AND FC102) 12
4. CABLE SELECTION AND CABLE INSTALATION 15
4.1 THREE PHASE RECEIVER POWER SUPPLY CABLE SELECTION 15
4.2 POWER AND CONTROL CABLE INSTALATION 15
5. HEAT RECOVERY SYSTEMS 16
5.1 PLATE HEAT EXCHANGER 16
5.2 ROTARY HEAT EXCHANGER 18
5.2.1 1 ~ PHASE ROTOR MOTOR (W/O CONTROL) 18
5.2.2 3 ~ PHASE ROTOR MOTOR (W/O CONTROL) 19
5.2.3 STEPPING MOTOR WITH CONTROLLER 20
6. HEAT EXCHANGERS 25
6.1 WATER HEATER 25
6.2 WATER COOLER 26
6.3 ELECTRICAL HEATER 27
6.4 GAS-FIRED HEATER 28
7. HUMIDIFIERS 29
7.1 STEAM HUMIDIFIER 29
7.2 EVAPORATIVE HUMIDIFIER 29
8. AIR FILTER SECTION 30
9. DAMPER SECTION 31
10. CONTROL SYSTEM 33
11. ACCESSORIES 35
11.1 FAN SAFETY SWITCH 35
11.2 SECTION LIGHTING 35
11.3 TEMPERATURE SENSORS (WITH INTEGRATED CONTROL SYSTEM) 35
11.4 DUCT SMOKE DETECTOR (WITH INTEGRATED CONTROL SYSTEM) 35
11.5 CO
2
DUCT AND ROOM SENSOR (WITH INTEGRATED CONTROL SYSTEM) 36
11.6 HUMIDITY DUCT AND ROOM SENSOR (WITH INTEGRATED CONTROL SYSTEM) 36
12. UNIT ASSEMBLING 37
13. UNIT’S BASE FRAME GROUNDING 38
14. CHECKLIST FOR UNIT START-UP AND MAINTENANCE 39