EN |
3
EIOM v2018.04
2. SAFETY PRECAUTIONS
• All work in connection with the assembly, installation and commissioning of the unit must be carried out by specially trained personnel. The unit
can only be taken into operation if it has been assembled in accordance with these installation and operation manual. All protective devices must
be effective.
• Do not use the unit for purposes other than its intended use. Use the unit only for the air handling (air filtration, heating, cooling, humidifying,
dehumidifying and mixing).
• Use special clothing and be careful while performing maintenance and repair jobs.
• Do not place fingers or other foreign objects through inlet or exhaust guards or into connected duct. Should a foreign object enter the unit, im
-
mediately disconnect power source. Before removing foreign object, make sure that any mechanical motion has stopped, the heater has cooled
down and the restart of the unit is not possible.
• Do not connect to any other power voltage source than indicated in the documentation and identification plate.
• Do not place or operate unit on unsteady surfaces and base frames. Mount the unit firmly to ensure safe operating.
• Do not use water or another liquid to clean electrical parts or connections. If you notice water on electrical parts or connections, stop operating
the unit.
• Do not make any electrical connections when the power is on.
• Before maintenance and repair, the unit must be switched off by the supply-disconnecting device, which must be locked with a padlock.
• Before cleaning with steam, make sure that there are no people inside the unit.
• For work on unit elements and assemblies that not covered in this document, refer to the separate manual.
• Air handling units must be properly grounded.
• Always observe all relevant local standards and statutory regulations.
• Do not use the unit if external connections are broken or damaged. If there are any defects, stop operating the unit and replace the damaged
parts immediately. That can be performed only by qualified electrician
