Salamander Pumps TapBoost TBS15, Installation Manual, Page: 5 / 20

3
2. Box Contents
1x TapBoost Pump (with 0.95m cable)
1x Power Supply Unit (with 1.15m cable)
1x Power Supply Unit Mains Cable (1.9m)
1x 15mm Inlet Compression Nut
1x 15mm Inlet Compression Olive
1x Spare Inlet Filter (one is pre-fitted to the pump inlet)
Note: each pump is tested with water before leaving the factory. Some
residual water may be present within the pump.
Important safety information: Only the Power Supply Unit and Mains
Power Cable provided must be used to operate TapBoost.
TapBoost Pump
(with 0.95m cable)
Power Supply Unit
(with 1.15m cable)
Power Supply Unit
Mains Cable (1.9m)
Inlet Filter
15mm Inlet
Compression Nut
15mm Inlet
Compression Olive
Conti
nuou
sly R ated
Min. I
nlet F
low Rat
e: 1.
2 L/m in
Max.
Inle t Pre
ssur
e: 10 00 kP
a (10
bar )
Max.
Water T
emp
: 65 °C
IPX 4 DC
12.0
V 22
W 1.8
A
Figure 2 - Box contents