Page 19
4.
If there are an odd number of specimen samples
to process, maintain the rotor balance by adding
one specimen chamber filled with water to pair
with the last unpaired specimen.
CAUTION: Be sure to orient the tab of the chamber
cap so that it will not make contact with the edge of
the rotor compartment, as shown by arrows (Figure
3V and 3W).
Figure 3V
Figure 3W
5.
Place the lid back on the rotor and press down on
the button with your fingers to lock the lid (Figure
3X).
Figure 3X
CAUTION: Make sure that the bowl lid is firmly
locked.
CAUTION: If the guard bowl unit needs to be
transferred with the specimen-loaded chambers set
in the rotor, be sure to lock the bowl lid and carefully
carry the guard bowl with both hands.
3.5 Starting the Operation
1.
Set the power switch to the
ON
position.
2.
Place the guard bowl into the instrument and close the
instrument lid (Figure 3Y).
Figure 3Y
Figure 3Z
3.
Press the
UP
(
) and
DOWN
(
) arrow keys (a) until the
desired program number is obtained (Figure 3Z).
NOTE:
If a desired program does not exist, make changes
to create a new program.
①
②
