Sakai SV510-III, Shop Manual

Page: 100 / 248

6-011
VIBRATORY DRUM • REAR AXLE
10) Slowly lift axle shaft subassembly (35) with a crane and
remove it.
(NOTICE)
In order not to lift eccentric shaft (5) together with axle
shaft subassembly (35), tap on the eccentric shaft
end with a wooden hammer via a wooden bar during
lifting.
(35) Axle shaft subassembly : 240 kg (529 lbs.)
11) Put removed axle shaft subassembly (35) on wooden
blocks.
12) Install a lifting bolt (M10) to the end of eccentric shaft
subassembly (5).
•
SV510- -06017
35
Wooden hammer
Wooden bar
SV510- -06017
35
Wooden hammer
Wooden bar
SV510- -06018
35
Wooden block
SV510- -06018
35
Wooden block
SV510- -06019
5
Lifting bolt
SV510- -06019
5
Lifting bolt