Sakai SV510-III, Shop Manual

Page: 91 / 248

6-003
VIBRATORY DRUM • REAR AXLE
2. VIBRATORY DRUM
2-1. Removal and Installation of Vibratory Drum
2-1-1. Removal of vibratory drum
1) Joint front frame and rear frame with steering lock bar (1).
WARNING
When lifting the machine body, use an appropriate hoist
of sufficient strength. Confirm that the surrounding area
is safe, and work in a natural, unstrained posture.
Also, to firmly secure the machine body, use a support
stand of sufficient strength.
2) Lift rear frame with a crane.
Firmly secure machine body by placing support stands
and/or wooden blocks at rear end of rear frame.
(NOTICE)
Do not allow rear wheel tires to leave the ground. (The
tires must support the machine’s body weight, too.)
Rear axle weight
SV510D- : 4,910 kg (10,825 lbs.)
SV510T- : 4,920 kg (10,850 lbs.)
SV510TF- : 4,890 kg (10,780 lbs.)
3) Lift front frame with a crane.
Ensuring that no load is applied to eight bolts (2) (left and
right sides), place support stands at right and left sides of
front frame. Firmly secure machine body.
Front axle weight
SV510D- : 5,760 kg (12,700 lbs.)
SV510T- : 6,110 kg (13,470 lbs.)
SV510TF- : 8,380 kg (18,475 lbs.)
•
•
•
SV510-
ޓ
-06001
1
SV510-
ޓ
-06001
1
SV510- -06002
Wooden block
Support stand
Lift with crane.
SV510- -06002
Wooden block
Support stand
Lift with crane.
SV510- -06003
Lift with crane.
2
Support stand
SV510- -06003
Lift with crane.
2
Support stand