VERS. 2022.10.14
CWT 315_MAN_EN
18
4.3 PRELIMINARY CHECKS
To move, repair, maintain or inspect, make sure
the machine is unplugged from the power socket.
Before inserting the power plug you need to:
- Place the machine on a stable and level
surface to ensure optimal support.
- Check that the state sharpness of the cutting
disc is in good condition conditions.
- The blade must be free of cracks or cracks
have all teeth at the same length; to be perfectly close and
connected.
- Check that the tightening of the nut that fixes the cutting
blade between the two flanges is sufficient to guarantee
the blocking of the blade itself.
- The belts are tensioned by releasing the motor screw (Fig.
3), and turning the motor clockwise (Fig. 4). While holding
the straps under tension, re-lock the screw.
- Make sure that the power socket has the same phase
characteristics as the electric motor, and that the power
supply line is equipped with a differential switch and
magneto-thermal protection (or with a fuse for short circuit
max 15 Amp).
- After these preliminary operations, the electrical
connection can be made.
LIGHTING
The saws are not equipped with lighting and therefore must
be used in adequately lit outdoor environments.
If it is not possible to have perfect visibility of the cutting line,
the use of the saw should not be authorized.
F
i
g
.
3
Fig. 4
