VERS. 2022.10.14
CWT 315_MAN_EN
12
3- GENERAL SAFETY RULES
3.1 PREMISE
Although the rigid and massive assembly offers the maximum guarantee for solidity
and robustness, a good placement is always advisable to increase the solidity and
eliminate unnecessary and harmful vibrations.
The manufacturer is exempt from
any responsibility for any damage caused by negligence
.
SAFETY RULES
1)
Before connecting to the electrical network, it is necessary to check that there is
adequate protection upstream of the line, with differential magnetothermic
protection and equipped with an earth conductor.
2)
Check that the voltage and frequency indicated on the plate correspond to those
of the net.
3)
Do not use cables, extensions, or plugs that are defective or not compliant with the
regulations.
4)
Make sure that work is always carried out in safe conditions.
5)
Always start work with the machine in a stable position.
7)
Do not use or expose the tool to rain.
8)
Position the cable correctly when working, that it always remains away from
the work area and that it is long enough to allow you to work.
9)
Remove always current from the net connection during maintenance.
10)
Use of the machine is allowed to adults and competent people.
11)
During work, scrupulously follow the instructions on the machine.
12)
The machines from our production are built with the required technical and
safety measures. Customers are therefore advised to strictly follow the rules
described in this booklet.
13)
To maintain the original characteristics and the validity of the certification, use
original
Saint-Gobain
spare parts
•
The use of the machine is recommended for adults and competent people (for
those who have never used the machine, an insertion course is recommended).
•
Work operations are safe if the following standards are observed.
•
This booklet must be delivered to the operator and kept.
•
The owner of the machine is responsible. Also make the operator responsible.
ATTENTION !
The machine can be dangerous if used improperly.
it can cause serious or fatal injuries.
It is absolutely essential that all work operations are carried out by a single
operator and not by several people.
ATTENTION !
Only the operator will be liable for all damages deriving from improper use
of the machine.
DO NOT USE THE MACHINE BEFORE READING THE MANUAL FOR
INSTRUCTIONS AND UNDERSTAND THE CONTENTS.
WHAT DESCRIBED IN THIS MANUAL CONCERNS YOUR
SAFETY.
