BarbLock® Tabletop Pneumatic Assembly Tool: Operations Manual
www.biopharm.saint-gobain.com
5
FLS-5278C-CLWR-Rev 01
4.0 Warnings and Safety Labels Continued
WARNING
– Safety Glasses Required:
any person who is operating, or is in the immediate vicinity of someone who
is operating, a BarbLock® Assembly Tool shall wear eye protection that meets or exceeds ANSI Z87.1. Due to the
significant forces generated by the BarbLock® Assembly Tool, there is a possibility of personal injury from projectile
material that may come from the tool in the event of a failure of a BarbLock® component.
There are seven (7) adhesive labels attached on the outer case of
the tool. The labels are presented and described in this section.
1. Saint-Gobain brand name and symbol (Figure 3)
2. Product identification and company information (Figure 4)
3. This User/Operator manual contains critical information that
must be understood by the user in order to prevent injury to
the user or damage to the tool. (Figure 5)
4. There are pinch points in the tool that must be understood by
the user in order to avoid injury. (Figure 6)
5. There is potential for projectile injury. Use of protective eyewear
is mandatory to avoid injury. (Figure 7)
6. Pressure limit for the tool air supply is 100 psi (0.7 MPa).
Exceeding this limit may damage the tool which could
lead to poor performance and unsafe operation. (Figure 8)
7. CE mark, indicating the tool has passed rigorous safety and
performance testing. (Figure 9)
Figure 8: Pressure Limits
Figure 3: Logo
Figure 4: Product Identification
Figure 5: User/Operator manual
Figure 6: Pinch Point
Figure 7: Protective Eyewear
Figure 9: CE Mark
