6105
6105
6105
6105 Belt
Belt
Belt
Belt Feeder
Feeder
Feeder
Feeder integrator
integrator
integrator
integrator
---
---
---
--- User
User
User
User’’’’s
s
s
s Guide
Guide
Guide
Guide ---
---
---
---
1
Chapter
Chapter
Chapter
Chapter 1
1
1
1
Introduction
Introduction
Introduction
Introduction
1.1
General
General
General
General
Incorporating the latest technologies and years of industry, Saimo Weigh Belt Feeder Systems provide
accurate and reliable solutions for weighing, totalizing, flow rate control for industries such as
metalliferous ore blending, power generation, quarry, cement, chemical and food, etc.
The belt feeder senses and weighs the material passing through the weighbridge to determine unit
weight (in kgs/m) of the material on the belt. Belt speed is continually measured with a digital speed
sensor whose pulse output is proportional to belt speed. The speed sensor is mounted on the tail-pulley
to assure accurate belt speed measurement and detection of any possible slippage. The speed signal
and weight signal are combined into the 6105 microprocessor-based integrator which generates and
displays a true-rate signal in TPH and the total of material fed. An internal controller compares the
flowrate signal to the feedrate setpoint derived from an industrial computer and sends necessary output
signal to the frequency converter, consequently changing the feeder’s belt speed to maintain the
desired constant rate of material fed. The total of material fed is monitored by the computer which
submits shutoff signal when a setup total is reached.This manual provides the information necessary
for installation, operation, maintenance and service of the 6105 integrator.
The 6105 integrator is available in panel mount and field mount. By processing the weight signal from
the load cell and the speed signals from the speed sensor, It calculates and displays flowrate and total
of the material fed.
Figure 1-1
6000 Series Integrator -- Panel Mount
