6105
6105
6105
6105 Belt
Belt
Belt
Belt Feeder
Feeder
Feeder
Feeder integrator
integrator
integrator
integrator
---
---
---
--- User
User
User
User’’’’s
s
s
s Guide
Guide
Guide
Guide ---
---
---
---
43
Set the output ports 5 through 8 in the same way as mentioned above.
Pressing “PAGE DOWN” soft key enters the fifth page of the I/O Definition Menu. This is the third page
for Output Definition.
Set the output port 9 through 12 in the same way as mentioned above.
Notes:
Notes:
Notes:
Notes:
1. [BAT READY] is a pulse input signal. When the 6105 integrator receives this signal, a measuring
period for a batch of material is started.
2. [BAT RUN] is also a pulse input signal. Upon acceptance of this signal, the system switches to start
running status with the switch turning to BAT RUN.
3. When the discharged material is up to the target weight, Discharge End signal is sent from the 6105
integrator.
4. When the measurement is up to the target weight, discharge signal is sent from the 6105 integrator.
5. If a port is not used, set it to [NO DEFINE].
2006-3-21
12:00:00
Scale #1
OUTPUTPORT SETUP 2
Out por 5:
[ NO DEFINE ]
[ OPEN ]
Out por 6:
[ NO DEFINE ]
[ OPEN ]
Out por7:
[NODEFINE]
[OPEN]
Out por 8:
[ NO DEFINE ]
[ OPEN ]
Press
↑
or
↓
key
，
then press ENT
！
MAIN
PAGE
PAGE
MENU
DOWN
UP
2006-3-21
12:00:00
Scale #1
OUTPUTPORT SETUP 3
Out por 9:
[ NO DEFINE ]
[ OPEN ]
Out por 10:
[ NO DEFINE ]
[ OPEN ]
Out por 11:
[ NO DEFINE ]
[ OPEN ]
Out por 12:
[ NO DEFINE ]
[ OPEN ]
Press
↑
or
↓
key, then press ENT!
MAIN
PAGE
PAGE
MENU
DOWN
UP
