English
- 14 -
of this menu. When this service is enabled all the
text that is typed by the user will be collected,
expect passwords.
Text to speech -
Choose the TTS engine. TTS is
a feature used by the apps. Only the Pico TTS is
supported currently. You can also configure the TTS
engine, set the speech rate, listen to an example
of the speech and see the current language status
using the other options of this menu.
3. Remote & accessories
3.1. Add accessory
You can use wireless accessories, such as remote
controllers, keyboards or game controllers with
Android source. Add devices to use them with your
Display. Touch this option to start searching available
devices in order to pair them with your Display. Set
your device to pairing mode. Available devices will
be recognized and listed. Touch your device to start
pairing.
Connected devices will also be listed under this
section. To unpair a device, touch the name of it. Then
touch the
Unpair
option. After that touch
OK
to unpair
the device from the TV.
4. Personal
4.1. Location
You can allow or restrict apps to use your location
information, display recent location requests or allow
the use of the wireless connection to estimate the
location.
4.2. Security & restrictions
Using the options of this menu;
•
You can allow or restrict installation of apps from
sources other than the Play Store.
•
Set the Display to disallow or warn before installation
of apps that may cause harm.
•
Restrict access to apps and other content in your
account.
You can restrict the use of certain apps by switching
the Display to a restricted profile. The Home menu
will only show the apps you allowed. You need a PIN
code to switch out of the restricted profile.
Restricted
Profile
option will appear at the bottom row of the
home screen. Move the focus to this option and press
OK
to enter.
Exit restricted profile
option will be
highlighted. Press
OK
and enter the PIN you defined
to switch out of the restricted profile mode.
Installing Third Party Applications
Check if the installation of apps from sources other
than the Play Store is allowed from the
System Set-
tings>Personal>Security & restrictions
menu. If
the checkbox next to the
Unknown sources
option is
not checked, highlight this option and press
OK
. Then
follow the below mentioned steps in order to install a
third party application.
• Copy the file with the extension “.apk” onto a FAT
formatted USB storage device
•
Connect the USB storage device to one of the
Android USB inputs on the Display. Refer to
General
View
section to see the USB inputs dedicated to the
Android system.
•
Select the USB storage device from the Android
launchers Removable Storage menu and press
OK
to browse the content. Highlight the file with
the extension “.apk” and press
OK
. Your
permission
will be asked. Select
Install
and press
OK
again
to proceed.
Connecting To Internet
To configure wired and wireless settings you should
access the
System Settings>Device>Network
menu
on the home screen. Two options will be available,
Wi-Fi
and
Ethernet
.
To Connect to a Wired Network
There is a secondary LAN port at the bottom of the
rear side of your Display dedicated to Android source.
Connect your Display to your modem/router via this
LAN port using an ethernet cable.
The status of the
Ethernet
option in the
Network
Settings
menu will be changed to
Connected
. The
MAC and IP addresses will also be displayed under
this caption.
LAN input on the bottom of
the rear side of the Display
To Connect to a Wireless Network
A wireless LAN modem/router is required to connect
the Display to a wireless network.
Highlight
Wi-Fi
option in the
Network
menu and
press
OK
to turn on the WLAN. Available networks
will be listed. Select one and press
OK
to connect.
You may be asked to enter a password to connect to
the selected network, in case the network is password
protected. Additionally you can connect to your router/
modem via WPS or add new networks by using the
related options.
