62
Sagemcom · MF 4591
EN
Enter the character
height
1. Press
OK
,
0054
and
OK
.
2. Enter the character height of the standard font
(point). The value must lie between 4.00 and
999.75 (the standard value is 12.00).
3. Confirm with
OK
.
Define the line break
1. Press
OK
,
0055
and
OK
.
2. Enter how the line and/or paragraph breaks
should be treated.
3. Confirm with
OK
.
Setting up page
orientation
1. Press
OK
,
0056
and
OK
.
2. You can set whether to print in letter or land-
scape format.
3. Confirm with
OK
.
Setting the font
1. Press
OK
,
0057
and
OK
.
2. Enter the number of the desired standard font.
The value must lie between CS1 and CS30 (the
standard value is CS1, Roman8).
3. Confirm with
OK
.
Setting the Fax
Reception Mode
· Setting the Fax Reception Mode
Fax Switch
The built-in fax switch of your device distinguishes
between fax messages and telephone calls. Faxes are
automatically received, telephone calls can be re-
ceived—even on additionally connected devices.
While the device is checking the call, it continues to
ring.
Setting the Fax Reception Mode
You have the following options available. The select-
ed fax reception mode appears on the display.
1. Press
OK
,
041
and
OK
.
2. Select the desired option using
[
.
3. Confirm with
OK
.
Manual Mode
Manual Mode
(
MANUAL
)
Manual Mode
The device will not receive faxes on its own. You can
start fax reception manually, by pressing
o
. This
setting is useful, when you want to receive faxes via
a modem connected to a computer.
Fax Mode
Fax Mode
(
FAX
)
Fax Mode
In the fax mode, the device will ring for as many
times as you have set with function 042 (see also
chapter
Setting the Number of Rings
, page 60). Then
the fax reception switches on. You should select this
mode if you primarily receive faxes at your device.
EXT/Answering Machine
Mode
EXT/Answering Machine Mode
(
FAX-ANSWER
)
EXT/Answering Machine Mode
You should set the device to this mode if you have
additional devices connected to the
Ï/EXT.
socket
of your device. If an additionally connected answer-
ing machine receives a call, your device will check to
determine whether or not the incoming call is a fax
transmission. If the device recognises a fax signal, it
will automatically receive the fax transmission.
Answering Machine
If you do not have an answering machine connected
or if a connected answering machine does not accept
the call, the device will take over the call after a pre-
determined number of rings and automatically re-
ceive any possible fax transmission being sent.
Fax Switch 1
Automatic Mode
Automatic Mode
(
AUTOMATIC
)
Automatic Mode
If the Automatic Mode is active, the device will check
to determine whether the incoming call is a fax
transmission or a telephone call. The device will au-
tomatically receive fax transmissions. While the de-
vice is checking the call, it continues to ring. You can
accept telephone calls at any time. After a predeter-
mined number of rings, the device will take over the
call and automatically receive a possible silent fax
transmission.
Silent Fax Reception
· Silent Fax Reception
Silent Fax Reception
Set the number of rings
0
(see also chapter
Setting
the Number of Rings
, page 60) and set the fax recep-
tion mode to fax mode (see also chapter
Setting the
Fax Reception Mode
, page 62), in order to receive fax-
es without your device ringing.
Fax Reception Mode with Additional
Devices
You should set the device to EXT/Answer-
ing device, Fax or Manual Mode if you
have additional devices connected to the
Ï/EXT.
socket of your device.
Fax at Additional Telephone
If you pick up at an additional device and hear
that you are receiving a fax (whistling tone or
silence), you can start the fax reception by
pressing
*5
on the additional telephone
or pressing
o
on the device. To use this func-
tion, additional telephones must be set to the
tone dialling mode (DTMF/MFV tones) (for
this purpose see the operating manual of
your additional telephone).
Summary of Contents for MF 4591
Page 1: ...MF 4591 User Manual...
