SAGEMCOM MF 4591, User Manual

Page: 26 / 92

26 Sagemcom · MF 4591
EN
2. Adjust the length of the paper tray to the printer
paper. Press the lock key on the base of the paper
tray. Slide the rear panel until it snaps into the
suitable marking: Legal =
LG , A4 = A4 , A5 = A5 ,
Letter = LE , B5 = B5 .
3. Separate the paper sheets by fanning them out,
then align them by tapping edge of the stack
lightly against a flat surface. This will prevent
several sheets of paper from being drawn in all at
once.
4. Insert the paper into the paper tray. You can load
up to 250 sheets (80¦g/m²) .
5. Enclose the paper with the two side paper guides.
Be sure not to enclose it so tightly that it bends.
6. Push the paper tray into the device all the way to
the stopping point.
CAUTION!
Initial Operation!
Please remove the protective cardboard
from the paper tray before loading paper
and replacing the paper tray into the de-
vice. Remove the document support and
the document outlet tray from the paper
tray.
EX
B5 B
5
A5
B6
A4
EX
B5 B
5
A5
B6
A4
EX
B5 B5
A4
Letter Lette
r
A4A4
Lega
l
Lega
l
A5A5
EX
B5 B
5
A5
B6
A4
≤¦250 ≤¦25
0
(80¦g
/m2
0¦g/
m2
)
Loading Pre-printed Material
If you would like to print on an input sheet
(for example, forms or stationery), place
the input sheet face down in the paper
tray, with the top of the page towards the
front.
CAUTION!
Forms from a Laser Printer!
Forms that have been printed out by a
laser printer are not suitable for further
printing.
EX
B5 B
5
A5
B6
A4
Lorem Ipsum sed dolor cum
vel ulla faccum ip exeratie
esequatisit iurercing ex ecte
venim do od tisl delit adit nulla
feugiamet,
cortis deliqui
blamcon sequametum iustion
EX
B5 B
5
A5
B6
A4
EX
B5 B5
A5
B6
A4