25
Data application
SERVICES AVAILABLE ON THE TERMINAL
Internet application
Parameter configuration in the computer
To log onto the Internet from your PC,
you will have to set up a «Dial-Up
Networking» connection.
To do this, go to
My Computer/Dial-
Up Networking
and select
Make New
Connection.
Give your connection a name and
select
Standard 19200 bps Modem
(*).
Click on
Configure…
and check that
the parameters are as follows:
Maximum speed
:
19200
Data bits
:
8
Parity
:
None
Stop bit
:
1
Flow control
:
hardware
Additional parameters
:
&K3+CBST=7,0,1
Then click on
Next.
Enter the phone number of your
Internet service provider. Click on
Next
and confirm by clicking on
Finish.
To access the Internet, start up your
Dial-Up Networking connection; you
must then enter the user name and
the password. When the connection
is established, start up your browser.
(*) If the
Standard 19200 bps Modem
is not in the list, click on
Cancel
then refer to the
chapter entitled MODEM INSTALLATION to install it.
ZAMBUUUJO.p65
10/04/02, 18:46
25
