16
Before connecting, read carefully safety instructions p3
Line
1. Connect your phone set to the other end of your phone cord.
2. Plug the phone cord into the RJ11connector J3
.
Power supply
1. Plug the power supply cable to the connector J4
.
2. Plug the other end of the power supply cable into a 230 V electrical socket outlet.
Commissioning
After having powered the terminal, you will see the lamps successively blinking as below
(it generally takes less than 1 minute, depending on network):
1. Both lamps on the front panel of the terminal flash alternatively to indicate that the
terminal is initializing.
2. At the end of initialization, both upper and lower lamps flash rapidly during
1 second.
3. If necessary, enter you PIN code as indicated in paragraph Your first call p13.
4. The lower lamp is on, meaning the terminal is ready to use.
Your terminal is now installed !
Check the signal strength.
You can now make your first calls !
INSTALLING AND USING THE TERMINAL FOR THE
FIRST TIME
Installing your terminal
J1
J2
J3
J4
J5
ZAMBUUUJO.p65
10/04/02, 18:46
16
