27
•
Select the
Command
tab and fill it
as follows:
•
Click on
OK
then on
Close
to
return to the window
Line setup
.
Select the modem created and the
serial port wanted then click on
OK
.
•
The application initializes the
modem and goes into waiting
state.
AT commands
Notation [-] = optional parameter
The following AT commands are handled by the phone:
ATE[0|1]<CR>
Command echo:
0=
off
1=
on.
ATV[0|1]<CR>
Answers to AT commands:
0=
digital format
1=
text format.
ATQ[0|1]<CR>
0=
Answers to AT commands are sent to the computer.
1=
Answers to AT commands are not sent to the computer.
ATD<number>[;]<CR>
or
ATDP<number>[;]<CR> Dialing.
or
ATDT<number>[;]<CR>
The characters for: ‘P’ or ‘p’ (pulse), ‘T’ or ‘t’ (tone), ‘W’ or ‘w’ (wait), ‘,’
(pause) are accepted and indifferent.
«;» at the end of the command, before <CR>, means: phone call (as
opposed to data call).
Data application
SERVICES AVAILABLE ON THE TERMINAL
ZAMBUUUJO.p65
10/04/02, 18:46
27
