Proc Sheet 1 11
myC-4
REMOVING / REPLACING THE VIBRATING
DEVICE
1/2
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
Page 5-34
4.67
Tools :
- Cross shaped screwdriver
- Soldering iron
- Solder wick
- Flat screwdriver
4.68 Preliminary operation
1. Remove the battery pack (
Proc sheet 0 01
).
2. Remove the back cover (
Proc sheet 1 02
).
4.69 Removal procedure :
1. Unsolder the vibrating device (1) on the equipped electronic board (2)
4.70 Placement procedure :
1. Flux the place of the vibrating device (1) and solder it on the equipped electronic board (2), respecting
the wiring sense
2. Position the vibrating device (1) in its housing
4.71 Further operations :
1. Remove the back cover (
Proc sheet 1 02
).
2. Remove the battery pack (
Proc sheet 0 01
).
