Technical Site Documentation myC-4
Ref. SCT U38 SSC DTS 0023 – Index B -February 21, 2005
Page 3-17
3.3 ERROR MESSAGES DURING START UP
Message
Meaning
Procedure
WARNING
UNTUNED
RADIO
Invalid EEPROM field (SAGEM)
SAGEM Factory Return
PB IMEI
Consistency problem at IMEI level
SAGEM Factory Return
SIM MISSING
SIM card missing or badly inserted
Insert the SIM card
IMEI ERROR
Consistency problem at IMEI level
SAGEM Factory Return
UNTUNED
Mobile not configured
SAGEM Factory Return
(except electronic SWAP
boards sent by SAGEM
Factory which only need a
SMT process)
UNKNOWN BATTERY
Battery not recognised by the mobile
Replace the battery
MOBILE PHONE LOCKED
Number of seizures of sim locked code
exceeded
SAGEM Factory Return
Not repair under warranty
SIM BLOCKED
Three bad PIN codes have been input
Contact the operator
SIM LOCKED (with SIM)
SIM card not adapted to the operator
Replace the SIM card
SIM LOCKED (without SIM) Attempt of corruption ( EEPROM fields)
SAGEM Factory Return
Not repair under warranty
BATTERY TOO LOW
Battery state
Replace the battery
3.4 OTHER ERROR MESSAGES
Message
Meaning
"LINE INCIDENT"
Fax & PC link type "Problems"
"FULL MEMORY"
Fax & PC link type "Problems"
"CLEARING REJECTED"
Fax & PC link type "Problems"
"CHECK CONNECTION"
Fax & PC link type "Problems"
"NOT CONSULTED DOCUMENT"
Fax & PC link type "Problems"
"DEVICE PROBLEM"
Fax & PC link type "Problems"
"VERIFY APPLICATION"
Fax & PC link type "Problems"
"BUSY"
"Problems" related to the network and Communications
"K.PAD LOCKED PRESS *V"
Keypad locked
"OPTION NOT AVAILABLE"
Menu not available for this product version
"PROG.KEY NOT VALID"
Input "Problems"
"ERROR!!"
Calculation error with the calculator (division by zero)
"NOT REACHABLE"
Call forwarding if the mobile is not reachable
"NOT AVAIL."
Not available
"PIN ERROR"
" PIN input problems "
"PIN2 BLOCKED"
Following input errors
