Proc Sheet 1 07
myC-4
REMOVING / REPLACING THE BACK COVER
OF THE UPPER SLIDE
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0023 – Index B - February 21, 2005
Page 5-26
4.47 Tools :
- Cross shaped screwdriver
- Tweezers
4.48 Preliminary operation
1. Remove the battery (
Proc sheet 0 01
).
2. Remove the back cover (
Proc sheet 1 02
).
3. Remove the front cover of the lower slide (
Proc sheet 1 06
).
4.49 Removal procedure :
1. Remove the two screws covers (2) on the back cover (1) by piercing them at the centre with tweezers
and by acting as a lever.
2. Unscrew the four attachment screws of the back cover
3. Push on the two stop pins (4) to liberate the back cover of the upper slide (1)
4.50 Placement procedure :
1. Replace the back cover of the upper slide (1) by engaging top hooks first
2. Position and screw the attachment screw (3) with 0,1 N.m torque.
3. Position two news screw covers (2) on the back cover of the upper slide
4.51 Further operations :
1. Replace the front cover of the lower slide (
Proc sheet 1 06
).
2. Replace the back cover (
Proc sheet 1 02
).
3. Replace the battery pack (
Proc sheet 0 01
).
