3-6
Setting your machine
Date en cours : 28 août 2002
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFL-MFC-MFK\MFL 251 153 211A_LU MF34 Sagem GB\Setting your machine.fm
Once the relay is activated by your fax and as soon as the document is received by the remote fax, the
document is printed before relaying to all subcribers on the list.
To activate relay from your fax machine:
+
Insert the document to relay (refer to paragraph Document positioning, page 5-1).
+
Select
M 37 OK - FAX / BROADCAST.
+
Enter the remote fax number where you will relay to or choose your dialling mode (refer to
paragraph Dialling, page 5-2) and press
OK
.
+
Enter the relay list number used by the remote fax and press
OK
.
+
You may enter the time you wish to transmit the document next to the current time and press
OK
.
+
If you wish to modify the document feed type, select one of the options
FEEDER
or
MEMORY
,
then press
OK
.
+
If you wish, you may enter the number of pages of your documents before transmitting.
+
Activate relay by pressing key
.
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
)D[RU3&UHFHSWLRQGHSHQGLQJRQPRGHO
M 243 OK - SETUP / RECEPTION / PC RECEPT.
This menu, combined with a software program installed on your PC (supplied or on option depending
on model) will enable you to select the machine you wish to receive the documents on:
• fax.
• PC.
• PC if available, fax otherwise.
For more details, please refer to the instruction manual provided with the software kit.
7
(&+1,&$/
3$5$0(7(56
As delivered your fax is preset by default. However, you may adjust it to meet your requirements by
resetting the technical parameters.
To set the technical parameters:
M 29 OK - SETUP / TECHNICALS
+
Select the desired parameter and confirm with
OK
.
+
With the keys
5
or
6
, modify the parameter settings by following the table below and
press
OK
.
MFL 251153211A_MF34 Sagem Gb.book Page 6 Mercredi, 28. août 2002 4:30 16
