Maintenance
6-23
Op
eration
Setting yo
ur
machine
Getting started
Directory
Mainte
nanc
e
Safety
Contents
Installation
Date en cours : 28 août 2002
0
,6&(//$1(286
,1&,'(176
At switch-on nothing appears on screen
Check that the mains cable is plugged in, and check the mains plug if necessary.
The fax does not detect the presence of your inserted document. The message
READY
does
not appear on the screen.
At the start and during scanning,
REMOVE DOCUMENT
appears on the screen.
Remove the document or press key
.
Check the thickness of the document (30 sheets of paper of 80 g/m
2
).
Iron out the sheets if needed.
Help the sheets along.
The fax machine does not receive any faxes
Check that the telephone line cable is correctly plugged in and that there is a tone signal on the
telephone line by means of the
key.
You receive a blank page
Make a photocopy of a document ; if it is correct then your fax is functioning normally. Call back
the subscriber and have him resend the document. It was probably sent with the sheet inserted
backwards.
You cannot send a fax
Check that the telephone line cable is correctly plugged in.
Check the tone by pressing key
.
Check the prefix is correctly programmed and used.
0
$&+,1(
3$&.,1*
$1'
75$163257$7,21
Always use the original package when transporting the machine. Failure to do so could void the
warranty.
+
1 - Disconnect the machine from the telephone network and the AC power socket
+
2 - Open the front cover
+
3 - Shut the front cover. Unplug the phone line cord and the AC power cord, the document
holder and the document stacker. Put them in the original package
MFL 251153211A_MF34 Sagem Gb.book Page 23 Mercredi, 28. août 2002 4:30 16
