Sagem FAX 4640, User Manual

Page: 58 / 104

5-12
p
Printer settings
Paper
Select the type of paper,
NORMAL
or
THICK
with keys or .
Confirm your setting by pressing key
OK
.
Remarks: 1) When the
THICK
type of paper is selected, the printing speed is slowed down..
2) Use the manual feeder for paper substances over 90 g/m
2
.
Paper tray
Select the paper tray to be used (
AUTOMATIC
,
LOWER
or
UPPER
) using keys or .
Confirm your setting by pressing key OK .
Margins
If you want to shift the side margins of your document to the left or to the right:
Adjust the left / right margin shift (in steps of 0.5 mm) by means of the keys or .
Press
OK
to confirm.
O
THER FUNCTIONS
L
OGS
The incoming and outgoing logs list the last 30 transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30 transmissions. However, you may request a print
out at any time.
Each log (incoming or outgoing) contains a table with the following information:
• date and time of the incoming or outgoing document,
• transmission mode (Normal, Fine, SFine or Photo),
• number of pages sent or received,
• call duration,
• incoming or outgoing results: noted CORRECT if properly transmitted,
or
information codes for special calls (polling, manual subscribers, etc.),
• reason for call error (example: your subscriber does not answer).
To print the logs:
M 52 OK - PRINT / LOGS
The incoming and outgoing logs are printed on the same page.