Sage SIE Series, Operation And Instruction Manual

Page: 26 / 75

S A G E M E T E R I N G , I N C .
O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
26
REV. 03-SIE/SRE
In addition, you can order your meter configured for
up to four different gas calibrations, and simply
select the desired channel (A-D) at any time (e.g. four
different gases, sensitivities, or configurations). Or
you can order the meter calibrated for one gas (e.g.
compressed air), but have it pre-con figured for up to
four different pipe sizes and full scales, so you can
simply select the desired channel (A-D) based on the
application. Chan nels are totally in de pendent and
each have their own full scale accu racy state ment
and settings.
There are numerous other features built in to most
Sage Flow Meters including the SIE/SRE Series. For
example, continuous tracking of the highest and
lowest mass flow rate with built in time and date
stamps. This is a very practical feature for determin-
ing unusual peaks in a gas process, or for identifying
excess usage by certain departments. Sage meters
provide the average flow rate for the prior hour at any
time. If you re quire relay outputs, the meter includes
an independent, 1 amp SPDT relay which can be con -
figured by laptop for a variety of settings, including
trip-high, trip-low (with or without relays), window
alarms, pulsed outputs, timer outputs, etc.
The Series SRE includes an Explosion Proof Remote
Enclosure that can be mounted 1000 feet away from
the sensor’s measurement point. Mounting Hardware
for the Remote Enclosure is included (see page 34).
The 6-conductor cable separating the sensor probe
(or flow body) from the electronics is lead-length
compensated, allowing the user to change wire length
without affecting the meter’s accuracy or perform-
ance. In addition, the probe has an Explosion Proof
Junction Box that does not require any electronics
(all the electronics, as well as the meter display and
menuing keypad, are in the Remote Enclosure),
thus the Junction Box is suitable for harsh environ-
mental conditions.
Sage also offers an OEM version of our proven,
high performance gas mass flow meter product line
(Series SIL or SRL). “Sage Lite” has many features
of the standard product line, but does not have a
display, does not have a menuing keypad, does not
support multiple channels, and does not support
relay outputs. However it has linear out puts of flow
rate and temperature or an optional configuration
for pulsed outputs of totalized flow. It is offered in
a 5x5x4 NEMA 4X enclosure, or Explo sion Proof
En closure, or as a single circuit board for customized
end-user packaging.
Sage also offers Sage Prime Thermal Mass Flow
Meters (Series SIP or SRP) or the General Purpose
Series (Series SIG or SRG). Contact Sage for de tails.
If there are any features that you require, or if
you need application assistance, feel free to contact
our local factory trained representative in your area.
Refer to www.sagemetering.com, or phone the Sage
Sales or Service Staff to assist you (866-677-7243).