Sage SIE Series, Operation And Instruction Manual, Page: 44 / 75

S A G E M E T E R I N G , I N C .
O p e r a t i o n s a n d I n s t r u c t i o n M a n u a l
44
REV. 03-SIE/SRE
The normal display is “Flow Mode”, where Flow
Rate, Total, and Temperature are displayed.
To make changes, see chart below.
Simplified Keypad Instructions
(SEE PAGE 49 FOR DETAILED KEYPAD NAVIGATION AND MENUS)
Press first to bring up Menus.
(PRESS REPEATEDLY TO VIEW
ALL MENUS.)
1
Press second to bring up Items
within a Menu.
(PRESS REPEATEDLY
TO VIEW ALL ITEMS.)
2
Press third to view Contents of Items
OR
Press after Passcode entered to change settings.
Press again to toggle out of Contents
OR
Press first to bring up Passcode
(Enter 99999) to unlock settings.
(PRESS
“BACK/DOWN” THEN “SELECT/SET”. REPEAT SEQUENCE
FIVE (5) TIMES THEN “SELECT/SET” TO ACCEPT.)
3
4
1
I M P O R T A N T S H O R T C U T S
To return to “Flow Mode”, simply hold “Forward/Up”, then press
“Flow/Shift” (unless viewing Contents). This also locks settings.
To view Serial Number and software revisions, press
“Back/Down” when in “Flow Mode”.
To switch Channels when in "Flow Mode" (if you have a Multiple
Channel meter), tap "Back/Down" 4 times (in under 3 seconds),
and then tap "Flow/Shift" for Channel A, "Select/Set" for
Channel B, "Forward/Up" for Channel C, or "Back/Down" for
Channel D
For additional shortcuts, see Common Shortcuts on page 56.