background image

10

If machine is run continuously for 30 minutes, 

allow machine to cool for 5 minutes before 

each use.

PRESET LONG BLACK

There are 3 preset Long Black settings – small, 

medium and large. To use one of these settings:
1.  Insert the 2 Cup Filter Basket into the 

Porta-filter.

2.  Fill the portafilter using the auto grind, 

dose & tamp function. 

3.  Insert the portafilter into the group head. 
4.  Position your cup so the portafilter spouts 

and hot water outlet are directed inside 

the cup. 

5.  Rotate the LONG BLACK dial to the 

desired cup size.

PRESET CUP SIZE

AMOUNT BREWED

Small

Approx. 180ml

Medium

Approx. 240ml

Large

Approx. 355ml

The brewed amounts are approximate only.  

Actual amounts may vary due to the coffee bean 

roast, blend and freshness as well as the selected 

grind size. These factors affect extraction rate and 

shot volume. 

6.  To start extraction, press the LONG 

BLACK dial. Espresso will extract from the 

portafilter spouts, followed by hot water 

from the hot water outlet.

MANUAL LONG BLACK

Start with fresh cold milk. Fill milk jug to below the 

spout position. Lift steam wand and insert into milk 

jug. Lower steam wand, ensuring it is fully down. 

The milk jug should rest on the drip tray and milk 

should cover the steam wand seal. 

MIN

MAX

To start, press down and release steam lever. Milk 

texturing will stop automatically when the selected 

milk temperature is reached. Lift steam wand  

to remove milk jug. Wipe the wand and tip with  

a damp cloth. Lower steam wand to the down 

position and the wand will automatically purge.

MANUAL MILK TEXTURING

Auto milk texturing and auto shut-off are disabled 

during manual milk texturing mode. 
Insert steam wand into milk jug. Lift steam lever to 

activate manual steam mode. Once the desired 

milk texture and temperature are achieved, lower 

the steam lever to the centre OFF position. Wipe 

the wand and tip with a damp cloth. Lower 

steam wand to the down position and the wand will 

automatically purge.

CAUTION: BURN HAZARD

Pressurised steam can still be released, 

even after machine has been switched off.

Children must always be supervised.

NOTE

OPERATING YOUR NEW APPLIANCE

Summary of Contents for Oracle SES980





























Reviews: