background image

2

CONTENTS

2 Sage

®

 Recommends Safety First

5  Know your new appliance

7  Operating your new appliance

17 Care & cleaning

23 Troubleshooting

SAGE

®

 

RECOMMENDS 

SAFETY FIRST

At Sage

®

 we are very safety 

conscious. We design and 

manufacture consumer 

products with the safety of 

you, our valued customer, 

foremost in mind. In 

addition we ask that you 

exercise a degree of care 

when using any electrical 

appliance and adhere to 

the following precautions.

IMPORTANT 

SAFEGUARDS

READ ALL INSTRUCTIONS 

BEFORE USE AND SAVE 

FOR FUTURE REFERENCE
•  The full information  

book is available at  

sageappliances.com 

•  Before using for the first 

time please ensure that your 

electricity supply is the same  

as shown on the rating label on 

the underside of the appliance. 

If you have any concerns 

please contact your local 

electricity company.

•  Remove any packaging 

material and promotional labels 

or stickers before using the 

Oracle

 for the first time.

•  To eliminate a choking hazard 

for young children, remove and 

safely discard the protective 

cover fitted to the power plug  

of this appliance.

•  Do not place the product near 

the edge of a bench or table 

during operation. Ensure the 

surface is level, clean and free 

of water and other substances.

•  Do not let the cord hang over 

the edge of a bench or table, 

or become knotted. Keep 

away from hot gas or electric 

burner, or where it could touch 

a heated oven. 

•  Appliances can be used by 

persons with reduced physical, 

sensory or mental capabilities 

or lack of experience and 

knowledge if they have been 

given supervision or instruction 

concerning use of the appliance 

Summary of Contents for Oracle SES980





























Reviews: