SAFWAY Hunnebeck Safescreen User Manual Download Page 91

Page: 91 / 156

Unless stated otherwise all dimensions are in mm

Safescreen

6.3 Main Fame assembly

6.3.1 Internal Main Channels

Start the SAFESCREEN

frame assembly by fixing bolts. Stiffeners, Lifting Barrels and

Main Bobbins to the internal Main Channel.

At this stage do not fix bolts for braces or platforms.

Lifting Barrel Main Support

Bobbin

MF Spacer

Lifting Barrel

M16 Bolts

Stiffening Angle

Main Channel

M16 Washer & M16

Nylok Nut

Main Support

Bobbin

MF Spacer Tube

WARNING

Warning!

Once paired Main Channels are joined together DO NOT reposition or turn over the

beam until a frame is fully assembled.

WARNING

Warning!

For the correct use of the S

tiffening

Angles (Product code: 595102) see page 40.

Summary of Contents for Hunnebeck Safescreen





























































































































































Search results

Summary of Contents for Hunnebeck Safescreen

Reviews:

Related manuals for Hunnebeck Safescreen

Brands by name

Popular brands

SAFWAY Hunnebeck Safescreen, User Manual

Search results

Summary of Contents for Hunnebeck Safescreen

Reviews:

Related manuals for Hunnebeck Safescreen

Brands by name

Popular brands