SAFWAY Hunnebeck Safescreen, User Manual

Page: 89 / 156

89
Unless stated otherwise all dimensions are in mm
Safescreen
6 Assembly
6.1 Safety­and­working­area
6.1.1 Safety
• Only competent and trained persons should be put in charge of assembly and
checking operations.
• It is the responsibility of competent and trained persons to ensure that all opera-
tives involved in the assembly and use of SAFESCREEN® have been made aware
of this document and that they understand the detail contained within HÜNNEBECK
drawings and the function of the ancillaries.
• The Health & Safety issues regarding manual handling are not covered by this
document.
• All major defects of any item must be reported immediately.
• Material deliveries are to be checked on arrival to site / place of destination as well as
before each use to ensure that they are in good condition and functioning correctly.
6.1.2 Working­Area
Prior to any assembly, an installation program should be established for each unit
with reference to HÜNNEBECK scheme design drawings.
At the commencement of work, an adequate area for the SAFESCREEN
®
assembly
process and access around it, must be prepared. This typically includes:
• Zone 1: to build frames and full units, with suitable access around it (typical unit size is
12m long x 4.6m wide).
• Zone 2: storage of equipment, items required for assembly.
• Zone 3: workstation for platform assembly and plywood cutting (typical platform size
is 4.6m long x 0.9m wide).
• Zone 4: storage for assembled frames and platforms.
• Zone 5: storage for fully assembled units (job specific requirements).
Use­adequate­trestles­/­packers­for­frames­and­workstations­for­platforms.­This­will­
allow­a­safe­and­easy­fixing.
In some cases, stepladders or additional working platforms may be required. Make sure
they stand on a firm base and are securely fixed whenever required.