SAFWAY Hunnebeck Safescreen User Manual Download Page 103

Page: 103 / 156

103

Unless stated otherwise all dimensions are in mm

Safescreen

6.4.7 Plywood to Fixed Platform with Extending Drawer

Cut the plywood as per scheme drawing supplied. Fix the plywood specified in the

scheme provided using self drilling screws with large washers.

Self drilling

screws

with large

washers.

NOTE

Note

Screw adequacy and centres to be determined during assembly.

VISUAL CHECK

nsure plywood is in accordance with the specifications stated in the scheme supplied.

NOTE

Note

notch in the underlying plywood is required for fixing where the top plywood need to

slide in.

Summary of Contents for Hunnebeck Safescreen





























































































































































Search results

Summary of Contents for Hunnebeck Safescreen

Reviews:

Related manuals for Hunnebeck Safescreen

Brands by name

Popular brands

SAFWAY Hunnebeck Safescreen, User Manual

Search results

Summary of Contents for Hunnebeck Safescreen

Reviews:

Related manuals for Hunnebeck Safescreen

Brands by name

Popular brands