SAFWAY Hunnebeck Safescreen User Manual Download Page 51

Page: 51 / 156

Unless stated otherwise all dimensions are in mm

Safescreen

4.24 Armadillo Plates

Armadillo Infill

Plates

Armadillo Starter

Plate

Armadillo End

Plate

M12x25 Screw

Pan Head

WARNING

Warning!

Secure ALL of the Armadillo Plates using the supplied chains and ALWAYS use both

chains per armadillo platform.

WARNING

Warning!

The Steel Chain is attached from plate to plate with repair links. At maximum extension

the chain must prevent all plates from slipping off the adjacent supporting plate.

NOTE

Note

Armadillo Plates must be able to slide one on top of each other. Starter Plate is always

the lowest, whereas End Plate is the highest and amount of I

nfill

Plates varies depend-

ing on specific job requirements.

NOTE

Note

Secure M12x25 Pan Head screw when plate is in maximum extension.

Steel Chain

Armadillo Plates

Secondary

Channel

Repair link Steel Chain

Secondary Channel

Summary of Contents for Hunnebeck Safescreen





























































































































































Search results

Summary of Contents for Hunnebeck Safescreen

Reviews:

Related manuals for Hunnebeck Safescreen

Brands by name

Popular brands

SAFWAY Hunnebeck Safescreen, User Manual

Search results

Summary of Contents for Hunnebeck Safescreen

Reviews:

Related manuals for Hunnebeck Safescreen

Brands by name

Popular brands