Display Group
(continued)
Sailer Manual HPVFE
36
d012 [Control Source]
Related Parameter(s):
P106, P108, t201, t202
Displays the active source of the Start Command and Speed Command which are normally defined by the settings of
P106
[Start Source] and
P108
[Speed Reference] but may be overridden by digital inputs. Refer to the flowcharts on pages
1-19
and
1-20
for details.
Values
Default
Read Only
Min/Max:
0/9
Display:
1
d013 [Control In Status]
Related Parameter(s):
d002, P104, P105
Status of the control terminal block control inputs.
Important:
Actual control commands may come from a source other than the control terminal block.
(1)The stop input must be present in order to start the drive.
When this bit is a 1 the drive can be started.
When this bit is a 0 the drive will stop.
Values
Default
Read Only
Min/Max:
0/1
Display:
1