Safran CORTEX CRT Quantum, User Manual

Page: 341 / 346

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
© Safran Data Systems
This document is the property of
Safran Data Systems
.
It cannot be duplicated or distributed without expressed written consent.
Page 261
5.2.2.3.
What to do in case of Temperature Alarm
In case of temperature alarm

Immediately shutdown and switch off the chassis to avoid any damage to the hardware.

Verify that the air exhaust system of the housing rack works properly,

Verify that the air intake and exhaust grids are clear. Important: a free rack space must be provided above
and below the chassis, except for the 2U chassis IS00452

Check the cooling fans on both sides of the chassis, at the rear panel of the chassis (power supply
module) and on CPU processors.

Return the chassis to SAFRAN DATA SYSTEMS or its maintenance representative if the problem cannot
be fixed on site.
5.2.3.
PC Workstation Maintenance
Refer to Annex 4 for detailed instructions on how to change:

The power supply module

The fan units

The disk drives: floppy, hard disk and CD ROM

The display assembly

The keyboard.
5.3.
Software Upgrade & Installation
The CORTEX CRT software comes under the form of Compact Disks (CD ROM):

Windows Operating System : to re-install the operating system after a disk failure, use SAFRAN DATA
SYSTEMS DVD-ROM Windows Restore for CORTEX .


CORTEX CRT software : to re-install or upgrade the CORTEX CRT software, use SAFRAN DATA
SYSTEMS CD ROM reference CORTEX CRT <Customer_name> 100xxx <Project_name>. The CD
includes the Cortex CRT application software, Cortex CRT Quantum board driver, and the user
documentation.
Strictly follow the install procedure described at the back of the CD ROMs.