Door Station Installation Guide
22
Note
The dimension of two-module gang box is: 237 (W) × 134 (H) × 56 (D) mm. The dimension is for
reference only.
Steps
1. Drill the installation hole, and pull the cable out.
Note
●
The suggested dimension of installation hole is 220 (W) × 108 (H) × 45.5 (D) mm.
●
The suggested length of cables left outside is 270 mm.
Figure 3-23 Drill the Installation Hole
2. Select a cable entry and remove the plastic sheet.
3. Mark the gang box screw holes on the hole.
1) Routs the cables through the gang box hole.
2) Insert the gang box into the installation hole.
3) Mark the gang box screw holes' position with a marker, and take out the gang box.
