System Limitations
System Capacity
Body Telescoping Handles
Installation Distance
Working Angle
Installation Surface
Roof or Floor Structure
Moving the System
Workers -
2 workers
1 worker per anchor attachment
Each worker weighing a max of 310 lbs. with tools
Handles on the lower body of the roof reach are only to be
used for telescoping and retracting the unit.
The Roof Reach must have a minimum installation distance
from the front of the unit to the leading edge of at least 2.5 ft.
Minimum installation distance from the side of the unit to the
leading edge is 3 ft.
Anchorage loading is designed such that the angle between the
overhead single point attachment on the Roof Reach to the worker
must not exceed 30 degrees from vertical.
The unit must sit on clean and dry surfaces which result in the
proper friction needed.
Roof or floor structure must be capable of supporting the weight
of the unit and loading that will be seen in the event of a fall.
Never remain connected to the system while attempting to move
the unit. Move the unit by using the handles on the front and back
of the unit. Never expose a worker to a potential fall hazard
during movement of the system.
