10
3.3
Support Bracket Installation
3.3.1 Weld on Plates (top and bottom)
The weld on plates shall be installed with a 6mm fillet weld down each side of the plate
(300mm weld per plate). The weld on plates are made from stainless steel 316, an appropriate
filler material shall be used depending on the substrate to which the plate is being welded. All
welding shall be done in accordance with AS 1554.
Figure 9
3.3.2 Bolt on Plates (top and bottom)
The bolt on plate top and bottom brackets are each fixed with 2x fastener specified below.
1 Steel - M12 or M16 as per Section 3.2.4.
2 Concrete - M16 fastener as per Section 3.2.2 (Drill size 18, embedment depth 95mm)or 3.2.3.
Figure 10
1
2
