Return to Table of Contents
Ref: SafetyLink Pty Ltd Permanent Ladder System
Page 22 of 36
Doc ID: MKT-471 Version: 19.0
LADDER HANDRAILS
90-DEGREE HANDRAIL
Product Code: LADER002.HR.90
75-DEGREE HANDRAIL
Product Code: LADER002.HR.75
75~90-DEGREE HANDRAIL
Product Code: LADER002.HR.7590
75~75-DEGREE HANDRAIL
Product Code: LADER002.HR.7575
COMPONENTS
2 x Handrails
4 x Bolt: M8x80mm 316SS
4 x Washer: M8 316SS
4 x Nyloc Nut: M8 316SS
INSTALLATION
1.
Place handrail on inside edge of ladder head stile, ensuring the attachment tabs are orientated down
the ladder stiles.
2.
Place the M8 bolt through the top handrail tab and through stile. Tighten with nyloc nut.
3.
Drill an 8mm hole through the lower handrail attachment tab into the ladder head stile.
4.
Place the M8 bolt through the bottom handrail tab and through stile. Tighten with nyloc nut.
5.
Repeat the same process to install other handrails.
